|Place of Origin:||China|
|Certification:||ISO9001 and ISO14001|
|Minimum Order Quantity:||2000 SQM|
|Packaging Details:||PP Woven fabric or Pallets, Stretch film inside for waterproof|
|Payment Terms:||T/T, L/C|
|Supply Ability:||2000 SQM/day|
|Name:||Road Building 8mm Erosion Control Geosynthetic Concrete Mat Cloth Roll||Thickness:||8mm|
|Width:||2.1mts||Structure:||3D Mesh And Cement Matrix|
Pioneer CemenTEX GCCM ROLLS ( Cement Cloth )
CemenTEX is available in a three thicknesses: CC5- 5 mm, CC8- 8 mm, and CC13- 13 mm, and in two formats (roll sizes): bulk rolls or small man-poHtable batch rolls. The quantity per roll differs between the thicknesses, which can be found on the data sheet. All three thicknesses are available in bulk rolls.
CemenTEX GCCM(Cement Cloth-CC)
|Pre-set CC Properties|
|Working time: 1-2 hours subject to ambient temperature.|
|CC will achieve 70-80% strength at 24 hours after hydration.|
|Method of hydration|
|Spray the fiber surface with water until it it feels wet to touch for several minutes|
|Re-spray the CC again after 1 hour if:|
|1.installing CC in a steep or vertical surface;|
|2.Installing in warm climates;|
|1.CC can not be over hydrated and an excess of water is always recommended;|
|2.Minimum ratio of water:CC by weight: 1:4|
|3.Don't jet high pressure water directly onto the CC as this may wash a channel in CC.|
|4.Please use non-saline water for hydration.If CC will be used for sea projects,please|
|advise us beforehand.|
|5.CC can hydrate and set under water;|
|6.CC has a working time of 1-6hours after hydration. Don't move or touch CMC|
|once it has begun to set.|
|7.Working time will be reduced in hot climate;|
|8.CC will set hard in 2-3 hours,but will continue to gain strength for several months.|
|Set CC Properties|
|Strength: Pioneer CemenTEX GCCM has very high early strength|
|Compressive Strength||ASTMC109-02||35-40 Mpa|
|Bending Strength||BS EN12467:2004||3-6 Mpa|
|CBR Puncture Strength||EN ISO12236:2007||3.5KN|
|Length Direction||Width Diection|
|Freeze-thaw resistance||BS EN12467:2004 Part5.5.2||pass|
|Soak Dry||BS EN12467:2004 Part5.5.5||pass|
|Water Impermeability||BS EN12467:2004 Part5.4.4||pass|
|Fire Retardant||16 CFR PART 1633||pass|
Who are we?
PioneerTEX is the professional and leading manufacturer of Concrete Mat Cloth rolls in China.
We have the patent for Concrete Mat Cloth in China.
We developed Concrete Mat Cloth Since 2014, and we get the patent in 2017.
And the technolog for Concrete Mat Cloth is mature in 2016.
What is CemenTEX GCCM (Cement Cloth-CC) ?
CemenTEX GCCM is a flexible and soft cement impregnated fabric, that hardens on hydration to form a thin,durable,water proof and fire retardant concrete layer. Essentially, it's concrete on a roll.
What's the structure of CemenTEX GCCM?
CemenTEX GCCM was made of woven geotextile, nonwoven geotextile, HDPE geomembrane, and 3D structure geocomposite fabric.
The specially formulated dry concrete powder mix will be reinforced by 3D mesh geo-fabric, and sandwiched between porous nonwoven geotextile and water proof HDPE geomembrane or Aluminium Foil composite.
How does the CemenTEX GCCM work?
CemenTEX GCCM allows concrete construction without the need for plant or mixing equipment. It's very easy, and just add water on the CC non-waterproof side.
Once Set, the 3D mesh fabric will reinforce the concrete, prevent crack propagation and provide a safe plastic failure mode. The woven and nonwoven geotextile on the top side will offer special protection on the CC, and offer higher tensile strength for composite.
HDPE geomembrane backing on the bottom surface of CC ensures the material is completely water proof.
How many types of Concrete Mat Cloth GCCM are we manufacturing?
CC GCCM is available in 3 thickness:
CemenTEX GCCM (Cement Cloth-CC)ADVANTAGE:
CemenTEX can be laid at a rate of 150m2/hours ,up to 10 times faster than conventional concrete solutions.
Easy to Use
CemenTEX is available in man portable rolls for application with limited access such as 10mts long. It's also very easy to cut by "box cutter". The conncrete inside of CMC is pre-mixed so there is no need for mixing or compacting.
Lower Project Cost
The speed and ease of installation mean CemenTEX GCCM is more cost-effective than conventional concrete,with less logistical complexity.
CemenTEX is a low mass, low carbon technology which uses up to 95% less material than conventional concrete for many applications.
Long Expectation Life
CemenTEX is made of high strength geotextile and special cement mixture. Its expectation life can reach more than 30 years. What's more, it is of no need for maintenance.
CemenTEX GCCM Key Properties
The HDPE Geomembrane backing on the bottom surface of the CC ensures that the CC GCCM has excellent impermeability.
The 3D mesh fabric reinforcement prevents CC from cracking, absorbs energy from impacts. The HDPE geomembrane and geotextile will improve CC composite strength after adding water.
CC is twice as abrasion resistant as standard OPC Concrete, has excellent chemical resistance, good weathering performance and will not degrade in UV.
Flexible and Soft
CC GCCM has good drape characteristics and will closely follow the ground profile and fit around existing infrastructure. Unset CC can be cut or tailored by basic hand tools.
The cement powder inside of CC will not come out from the edge because of special sealing edge.