Sludge Dewatering Geotube
PTT Sludge Dewatering Geotube Introduction:
As one of the leading and professional manufacturer of technical textile, we PioneerTex ourselves design and manufactuer sludge dewatering geotube and Geobags based on customer’s
Specification or some special request.
PioneerTex Sludge Dewatering Geotube was made of industrial PP monofilament woven
Geotextile GT500 in critical and special construction with perforations that allow water to exit,
while the strength of the sheet entraps the solid particles inside the tube. This efficient and economical dewatering system facilitates treatment of sludge while preventing environmental damage.
PioneerTex GT500 can compete with Tencate geotube fabric. We use our GT500 PP woven fabric to produce geotube in our workshop. Size can be made to cutomer’s order.
Our Geotube fabric can also reach the specification as per Tencate GT Series!
We have our own competitive advantage on price and quality compared with Tencate or ACE.
PTT Sludge Dewatering Geotube Applications:
Cleaning reservoirs and storage ponds
Cleaning and rehabilitating lakes, streams and other waterways
Cleaning reservoirs containing organic and inorganic sludge from industrial sources
A solution for maintaining aeration and sedimentation ponds in sewage treatment facilities
Reducing costs of removing agricultural sludge, reverse flushing of sand and sludge filters from biological digesters.
Advantages of using Geotube:
-High output compared with other solutions
-Good quality filtrate – capable of removing about 99% of all solids
-No environmental hazards – such as odors
Method of Operation:
The material is pumped into the geotube with the addition of polymers to induce flocculation,
so as to increase the efficiency of separation between solids and liquids.
More than 99% of the solids are trapped within the Geotube while the filtered water drains
from it and is collected for reuse or returned to the reservoir from which it was pumped.
Filling and dewatering is carried out over several cycles for maximum utilization of the
container. At the end of the final filling/dewatering cycle, the solids within the
Geotube continue to consolidate as the self weight of the sludge remaining in the Geotube
causes more water to emerge through the woven fabric. The solids trapped in the Geotube
are removed to an appropriate site (composting, waste disposal site, hazardous materials disposal site) or for additional treatment.