PioneerTEX GCCM Concrete Rolls for Erosion Control made cement and 3D cloth for slope protection and ditch lining

Basic Information
Place of Origin: Jiangsu,China
Brand Name: PioneerTEX
Certification: ISO9001
Model Number: CMC13
Minimum Order Quantity: 1500m2
Price: 22 US$/SQM
Packaging Details: PE film inside, thick PE film outside
Delivery Time: 4-6weeks
Payment Terms: L/C, T/T
Supply Ability: 2000 SQM/Day
Material: 3d Mesh Fabric And Cement Mixture Carrier Fabric: Needle Punch Nonwoven Or Woven Geotex
Covering Fabric: Needle Punch Nowoven Geotextile Backing: HDPE Geomebrane Backing
Color: Grey, Green And White Weight: 18kgs/m2
Thickness: 13mm
High Light:

GCCM Concrete Erosion Control Mats


13mm concrete impregnated fabric


GCCM concrete impregnated fabric

13mm CemenTEX-Cement Cloth GCCM (18kgs/m2) for permenent erosion control


How many types of Concrete Mat Cloth(CMC) GCCM are we manufacturing?


CMC GCCM is available in 3 thickness:








Concrete Mat Cloth GCCM Physcial Properties      
CMC Thickness
Roll Width
CMC5 5 8 1500 20% 2.1
CMC8 8 11 1500 20% 2.1
CMC13 13 18 1500 20% 2.1
Pre-set CC Properties      
Working time: 1-2 hours subject to ambient temperature.    
CC will achieve 70-80% strength at 24 hours after hydration.    
Method of hydration        
Spray the fiber surface with water until it it feels wet to touch for several minutes
after spraying.        
Re-spray the CC again after 1 hour if:      
1.installing CC in a steep or vertical surface;    
2.Installing in warm climates;      
1.CMC can not be over hydrated and an excess of water is always recommended;
2.Minimum ratio of water:CMC by weight: 1:4    
3.Don't jet high pressure water directly onto the CMC as this may wash a channel in CMC.
4.Please use non-saline water for hydration.If CMC will be used for sea projects,please
advise us beforehand.        
5.CMC can hydrate and set under water;      
6.CMC has a working time of 1-6hours after hydration. Don't move or touch CMC
once it has begun to set.        
7.Working time will be reduced in hot climate;    
8.CMC will set hard in 2-3 hours,but will continue to gain strength for several months.
Set CC Properties        
Strength: PioneerTex Concrete Mat Cloth has very high early strength  
Item Test Method MARV  
Compressive Strength ASTMC109-02 35-40 Mpa  
Bending Strength BS EN12467:2004 3-6 Mpa  
CBR Puncture Strength EN ISO12236:2007 3.5KN  
  Tensile Strength(KN/M)  
  Length Direction Width Diection  
CMC5 25 20  
CMC8 28 24  
CMC13 32 28  
Item Test Method Value  
Freeze-thaw resistance BS EN12467:2004 Part5.5.2 pass  
Soak Dry BS EN12467:2004 Part5.5.5 pass  
Water Impermeability BS EN12467:2004 Part5.4.4 pass  
Fire Retardant 16 CFR PART 1633 pass  


Who are we?


PioneerTEX is the professional and leading manufacturer of Concrete Mat Cloth rolls in China.

We have the patent for Concrete Mat Cloth in China.

We developed Concrete Mat Cloth Since 2014, and we get the patent in 2017.

And the technolog for Concrete Mat Cloth is mature in 2016.


What is Concrete Mat Cloth (CMC) GCCM ?


CMC GCCM is a flexible and soft cement impregnated fabric, that hardens on hydration to form a thin,durable,water proof and fire retardant concrete layer. Essentially, it's concrete on a roll.


What's the structure of Concrete Mat Cloth GCCM?


CMC GCCM was made of woven geotextile, nonwoven geotextile, HDPE geomembrane, and 3D structure geocomposite fabric.

The specially formulated dry concrete powder mix will be reinforced by 3D mesh geo-fabric, and sandwiched between porous nonwoven geotextile and water proof HDPE geomembrane or Aluminium Foil composite.


How does the Concrete Mat Cloth CMC GCCM work?


CMC GCCM allows concrete construction without the need for plant or mixing equipment. It's very easy, and just add water on the CMC non-waterproof side.


Once Set, the 3D mesh fabric will reinforce the concrete, prevent crack propagation and provide a safe plastic failure mode. The woven and nonwoven geotextile on the top side will offer special protection on the CMC, and offer higher tensile strength for composite.


HDPE geomembrane backing on the bottom surface of CMC ensures the material is completely water proof.



Concrete Mat Cloth GCCM ADVANTAGE:


Rapid Install


CMC can be laid at a rate of 150m2/hours ,up to 10 times faster than conventional concrete solutions.


Easy to Use


CMC is available in man portable rolls for application with limited access such as 10mts long. It's also very easy to cut by "box cutter". The conncrete inside of CMC is pre-mixed so there is no need for mixing or compacting.


Lower Project Cost


The speed and ease of installation mean CMC GCCM is more cost-effective than conventional concrete,with less logistical complexity.




CMC is a low mass, low carbon technology which uses up to 95% less material than conventional concrete for many applications.


Long Expectation Life


CMC is made of high strength geotextile and special cement mixture. Its expectation life can reach more than 30 years. What's more, it is of no need for maintenance.




Concrete Mat Cloth GCCM Key Properties


Water Proof


The HDPE Geomembrane backing on the bottom surface of the CMC ensures that the CMC GCCM has excellent impermeability.


Strong-High Strength


The 3D mesh fabric reinforcement prevents CMC from cracking, absorbs energy from impacts. The HDPE geomembrane and geotextile will improve CMC composite strength after adding water.




CMC is twice as abrasion resistant as standard OPC Concrete, has excellent chemical resistance, good weathering performance and will not degrade in UV.


Flexible and Soft


CMC GCCM has good drape characteristics and will closely follow the ground profile and fit around existing infrastructure. Unset CMC can be cut or tailored by basic hand tools.


Sealing Edge


The cement powder inside of CMC will not come out from the edge because of special sealing edge.




Contact Details

Phone Number : +8613924978499

WhatsApp : +8613924978499